SmartLogger1000
User Manual
LCD
Issue 12 (2019-01-15)
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
1. On the default screen, press
the main menu.
2. Choose
and press
3. Enter the User Name and Password by
pressing
or
, and then press
NOTE
Because of the limited permission, select the
User Name as Advanced User or Special
User. The initial password for Advanced User
and Special User is 000001.
After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit the screen and log in
again within the 30 seconds, no permission
authentication is required.
4. Press
, select Data Clear, and press
.
NOTICE
Cleared data cannot be restored. Therefore, perform
this operation with caution.
6 User Interface
to enter
.
.
147