Table of Contents
Advertisement
To adjust focus manually
To adjust brightness
To shoot with the backlight function
Presetting Angle and Zoom Settings
To store a setting
Press the [0] button on the Remote Commander, the focus adjustment
setting changes to automatic adjustment.
Press the [#t] button on the Remote Commander repeatedly to move the
focus point further away to the camera.
Press the [ * T] button on the Remote Commander repeatedly to move the
focus point closer to the camera.
Press the [9] button on the Remote Commander repeatedly to make the
picture brighter.
Press the [7] button on the Remote Commander repeatedly to make the
picture darker.
When you shoot a subject with the light source behind the subject, use the
backlight function.
Each time you press the [8] button or the MIC/DOC-DARK button on the
Remote Commander, the backlight function toggles on and off.
You can store the camera settings in memory up to six presets, and each
preset has the angle and zoom settings.
Once a setting has been stored, you can easily recall a setting from the six
presets.
1
Open the Camera menu.
2
Select Preset Save with the joystick on the Remote Commander, then
press the joystick.
Chapter 2 Basic Operation During a Meeting
(Continued)
73
Advertisement
Table of Contents
