Honeywell TH8321 Product Data page 7

ALTERNATE MOUNTING LOCATION
FOR DISCHARGE SENSOR.
DEHUMIDIFIER
Fig. 5.
VENTILATOR
OR
DEHUMIDIFIER
Fig. 6.
MOUNT
DISCHARGE
SENSOR HERE
ABOVE CENTER
OF A-COIL
UPSTREAM OF
DEHUMIDIFIER
HEAT
EXCHANGER
BLOWER
M35770
MOUNT
DISCHARGE
BYPASS
SENSOR HERE
HUMIDIFIER
HEAT
EXCHANGER
BLOWER
M35771
VISIONPRO® 8000 SMART THERMOSTAT
BYPASS
HUMIDIFIER
VENTILATOR
OR
DEHUMIDIFIER
Installing Discharge Air
Temperature Sensor
Use the following steps to mount the Discharge Sensor:
1. Attach plastic cover to the sensor probe.
2. Drill 1/4-inch hole for the sensor probe and mount it
to the ductwork with enclosed screws (see Fig. 8).
3. Connect wires to S1 terminal at the thermostat.
4. Setup the S1 terminal in the Installer Setup at the
thermostat.
Fig. 8. Mounting Discharge Air Sensor.
7
MOUNT
DISCHARGE
SENSOR HERE
HEAT
EXCHANGER
BLOWER
M35772
Fig. 7.
M32995
33-00096—04