Each Setting And Adjustment; How To Update The Firmware; Default Setting - Pioneer PD-30-K Service Manual

1

8. EACH SETTING AND ADJUSTMENT

8.1 HOW TO UPDATE THE FIRMWARE

Procedures for updating the firmware
A
1 Turn on the unit.
2 Press the "FUNCTION" button of the unit, and set to
"DISC mode".
3 Open the disc tray.
4 Insert the disc for updating to the dtray.
5 Close the disc tray.
When reading starts, be displayed as follows by unit
display window. (Fig. 1)
B
6 If the reading of the disk is completed, press the
"f (PLAY/PAUSE)" button.
7 Take out the update disk which the disk tray opens.
Caution:
Never unplug the power cord until the updating process is
completed.
8 Wait until "SUCCESS" is displayed by unit display
window.
C
9 Pull out power cord.
D
E

8.2 DEFAULT SETTING

IC4004 : IN6J0C04A0
Auto Power Off : Off
CD/SACD : SACD
Pure Audio : Off
DIMMER : Off (100%)
F
34
1
2
UPG?
Fig. 1
2
3
How to confirm the firmware version
1 Turn on the unit.
2 Press the "FUNCTION" button of the unit for eight
seconds.
3 Version number of SUB MICON is displayed as follows
by unit display window. (Fig. 2)
4 Press the "p" button of the remote control unit.
5 Version number of MAIN MICON is displayed as follows
by unit display window. (Fig. 3)
Y PB 25 2 1 B
Released times on the same date
Release date (Example: 2012.5.21)
Fixed
6 Press the "p" button of the remote control unit.
7 Version number of EEPROM is displayed as follows
by unit display window.(Fig. 4)
8 Press the "p" button of the remote control unit.
9 Version number of SUM CHECK is displayed as follows
by unit display window. (Fig. 5)
a Turn off the unit.
PD-30-K
3
4
DB07T25211
Fig. 2
YPB2521B
Fig. 3
X = October
Y = November
Z = December
M11902AM00
Fig. 4
SUM.25E0
Fig. 5
4