Listening To Each Program Source In Its; Source Sound Memory; Registered Surround Menu Source Sound Memory; Changing The Line Output Level - Sony CDX-C710 Operating Instructions Manual

3
Press (+) or (–) to adjust the volume.
After three seconds, the display goes back
to the normal playback mode.
Adjusting the turn-over frequency
You can adjust the bass and treble turn-over
frequencies.
Turn-over frequency
1
Press (SOURCE) to select a source (radio,
CD or MD).
2
Press (SOUND) for two seconds.
3
Press (SOUND) repeatedly until "BAS" or
"TRE" appears.
Bass adjusting mode
BAS
SUR
3 1 4
EQ
Treble adjusting mode
TRE
SUR
3 1 K
EQ
4
Press (+) or (–) to select the turn-over
frequency.
The turn-over frequencies change as
follows:
Bass:
198 Hz n 250 Hz n 314 Hz* n 396 Hz
Treble:
2.0 kHz n 3.1 kHz* n 4.0 kHz n 5.0 kHz
* Factory-set frequency
5
Press (SOUND) for two seconds.
The display goes back to the normal
playback mode.
Actual total number:
Listening to each program
source in its registered
surround menu

— Source Sound Memory

You can listen to the same source always in the
same surround menu even after changing the
program source or turning the unit on and off
again.
Frequency (Hz)
Note
If the optional TV tuner is connected "LSM" (Last Sound
Memory) appears on the TV display.
Changing the line output
level
1
2
Press (SHIFT), then press (2) (SET UP)
until "L.OUT" appears.
Press (4) (n) to select the desired
setting (–10 dB or –16 dB).
Sony CDX-C710 (E) 3-856-120-12(2)
EN
21