Fading In Or Out (Cdp-Xe570/Xe370 Only); Recording From Cds (Cdp-Xe570 Only); Recording A Cd By Specifying Tape Length (Time Edit) - Sony CDP-XE570 Operating Instructions Manual

Fading In or Out
(CDP-XE570/XE370 only)
You can manually fade in or out to prevent
tracks from starting or ending abruptly.
Note that you cannot use this effect when you
use the DIGITAL OUT (OPTICAL) connector.
Press FADER
To
Start play fading in During pause. For the CDP-
XE570, "FADE" flashes. For
the CDP-XE370,
up in the display and the Q
indication flashes. The play
fades in.
End play fading out When you want to start fading
out. For the CDP-XE570,
"FADE" flashes. For the CDP-
XE370,
display and the q indication
flashes. Then play fades out and
the player pauses.
Fading time lasts for 5 seconds.
FADE
lights
FADE
lights up in the

Recording From CDs (CDP-XE570 only)

Recording a CD by
Specifying Tape Length
(Time Edit)
You can have the player create a programme
that will match the length of the tape. In this
feature, the player creates a programme
basically keeping the original order of the disc.
However, the player may change the last track
of each side to match the recording time to the
tape length.
i.e. Side A: track number
Side B: track number
The programme may contain up to 24 tracks (a
pause inserted between tracks is counted as one
track).
Note that tracks numbered over 24 cannot be
programmed in this feature.
1
Press TIME EDIT before you start
playing until "EDIT" appears and
"TAPE A" flashes in the display.
2
Press m or M to specify the tape
length.
Each time you press these buttons, the
display changes as shown below with the
tape length of one side .
HALF C-46 23.00
- -. - - C-90 45.00
When you select "HALF"
The player divides the total playing time of
the disc in half, keeping the original order.
Note that you cannot select "HALF" when
the disc has more than 24 tracks.
1t2t3t4t8
5t6t7t9t10
C-54 27.00
C-60 30.00
C-74 37.00
continued
13