Siemens Sinumerik 840D sl Function Manual page 6

Motion control information system
Hide thumbs Also See for Sinumerik 840D sl:
Table of Contents

Advertisement

Preface
Standard scope
This Programming Guide describes the functionality afforded by standard
functions. Extensions or changes made by the machine tool manufacturer are
documented by the machine tool manufacturer.
Other functions not described in this documentation might be executable in the
control. However, no claim can be made regarding the availability of these
functions when the equipment is first supplied or in the event of servicing.
For the sake of simplicity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case
of installation, operation, or maintenance.
Technical support
If you have any technical questions, please contact our hotline:
Europe and Africa:
Phone: +49 180 / 5050 - 222
Fax: +49 180 / 5050 - 223
0.14 €/min. from German landlines, max. 0.42 €/min for calls from a mobile
phone
Internet:
America:
Phone: +1 423 262 2522
Fax: +1 423 262 2200
E-mail:
Asia/Pacific:
Phone: +86 1064 757575
Fax: +86 1064 747474
E-mail:
Questions about the documentation
If you have any queries (suggestions, corrections) in relation to this documentation,
please fax or e-mail us:
Fax: +49 9131 98 2176
E-mail:
A fax form is available in the appendix of this document.
SINUMERIK Internet address
http://www.siemens.com/sinumerik
vi
http://www.siemens.com/automation/support-request
mailto:techsupport.sea@siemens.com
mailto:support.asia.automation@siemens.com
mailto:docu.motioncontrol@siemens.com
Motion Control Information System DNC (FBDN) - 04/10 Edition
© Siemens AG 2010 All Rights Reserved
04/10

Advertisement

Table of Contents
loading

Table of Contents