Description Of The 1St Section Of The List Editor - Siemens Sinumerik 840D sl Function Manual

Motion control information system
Hide thumbs Also See for Sinumerik 840D sl:
Table of Contents

Advertisement

DNC Plant/DNC Cell (FBDN1)
10 Configuration

10.8.2 Description of the 1st section of the List Editor

General
The defaults determine the preview displayed in the 3rd section of the editor. The
display group also determines which complete list description (see above) is
currently being modified and will be saved.
Using the Display Group combination field, you can choose one of the available
display groups. If you change the display group, you have to decide whether you
want to save the changes made so far.
Using the Language combination field, you can choose one of the available
languages. This field determines the language in which your preview appears.
Creating display groups
To create a new display group, you enter the name of the new group in the
Display Group combination field. Then save this display group immediately.
Note
Before you create a display group, choose a display group with a list display
similar to your new one. This list display is used as a basis for the new list display
so that you do not need to start from scratch.
Before you can assign your new display group to a user, a screen and list
description must exist for this display group.
In addition to display groups that can be named as required by the user, DNC
contains predefined names for display groups:
#CSV:
#PRINTLIST:
DELLIST
FBDN1/10-228
Defines which
field contents in the data records are written to the
CSV file.
Here, you can configure which field content is displayed when
the administrative data is printed or when the print preview is
called up.
Defines the sequence of columns in the "Delete Version
Dialog" in DNC IFC SINUMERIK.
Motion Control Information System DNC (FBDN) - 04/10 Edition
© Siemens AG 2010 All Rights Reserved
05.07

Advertisement

Table of Contents
loading

Table of Contents