Using The Web Hmi; Logging In - ABB Relion 630 Series Operation Manual
Protection and control
Hide thumbs
Also See for Relion 630 Series:
- Technical manual (380 pages) ,
- Communication protocol manual (304 pages) ,
- Engineering manual (156 pages)
Table of Contents
Advertisement
1MRS756509 E
4.2
4.2.1
630 series
Operation Manual
Using the Web HMI
WHMI is disabled by default.
1.
To enable the WHMI, select Main menu/Configuration/HMI/Web HMI/
Operation via the LHMI.
2.
To enable writing through the WHMI, select Main menu/
Configuration/HMI/Web HMI/Write mode via the LHMI.
3.
To open the WHMI, write the IED IP address to the address bar of the
browser.
Do not use favorites in the web browser. If the user is unauthorized
and selects a favorite pointing to a WHMI page, the action can redirect
the user to the log in page. With authorization the user is redirected to
the startup page.
Logging in
If no users have been created with PCM600, both the default user ID and password is
SuperUser.
1.
Enter the username.
2.
Enter the password.
3.
Click OK.
A071238 V3 EN
Figure 29:
Entering username and password to use the WHMI
Section 4
Using the HMI
47
Advertisement
Table of Contents
