Siemens Simatic Ident Function Manual page 9

Ident blocks
Supported range of commands:
•
•
•
•
•
•
•
•
•
Supported range of functions:
•
For more detailed information on the blocks, refer to the sections "Programming Ident blocks
(Page 24)" and "Programming the Ident profile (Page 68)".
Recommendation for the selection of blocks
If the Ident blocks cover your functional requirements, use these. The Ident blocks are easier
to program and the parameters can be assigned usually without further documentation. The
program is easier to read and programming requires less effort.
The Ident profile is a complex block. We recommend that the Ident profile should only be
used by trained users or when there are special requirements.
Ident profile and Ident blocks, standard function for Ident systems
Function Manual, 10/2018, C79000-G8976-C387-04
Reader-Status
Inventory
Tag-Status
Read
Write
Set-Ant
Write-ID
Reset-Reader
...
AdvancedCMD
for chained command structures (using indi-
vidual commands in a chain is identical to the
Ident profile)
2.1 Area of application and features
Ident profile
Supported range of commands:
All commands implemented on the reader, e.g.
Inventory
•
Physical-Read
•
Get-Blacklist
•
Match string functions (only with MV)
•
...
•
Supported range of functions:
Repeat
•
Chaining
•
Description
9