Audio Setup - Sony NXCAM HXR-NX5N Operating Manual

Changing the settings of your camcorder recordings (Continued)
To copy the picture profile setting to
another picture profile number
See page 33 for the location of the buttons.
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile number that
you want to copy from with the SEL/
PUSH EXEC dial A.
3 Select [SETTING] t [COPY] with
SEL/PUSH EXEC dial A.
4 Select the number of the picture profile
that you want to copy to with the SEL/
PUSH EXEC dial A.
5 Select [YES] with the SEL/PUSH
EXEC dial A.
RETURN] t [OK] with the
6 Select [
SEL/PUSH EXEC dial A.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
See page 33 for the location of the buttons.
1 Press the PICTURE PROFILE button
B.
2 Select the number of the picture profile
that you want to reset with the SEL/
PUSH EXEC dial A.
3 Select [SETTING] t [RESET] t
[YES] t [
with the SEL/PUSH EXEC dial A.
40
RETURN] t [OK]

Audio setup

Channel setting
1 Select input sources with the CH1 (INT
MIC/INPUT1) switch C and the CH2
(INT MIC/INPUT1/INPUT2) switch
D.
See the table below for the recording
channels.