Table of Contents
Advertisement
Specifications (Continued)
(headphones) jack
i
Stereo-minijack (Ø 3.5 mm)
Input connectors
INPUT1/INPUT2 jacks
XLR 3-pin, female,
MIC: -48 dBu: 3 kΩ (kilohms)
(Variable in the range of between
-60 dBu and -30 dBu in 6 dBu step by
the INPUT TRIM function)
LINE: +4 dBu: 10 kΩ (kilohms)
(0 dBu = 0.775 Vrms)
Input/Output connectors
USB jack
mini-B
Remote jack
Stereo mini-minijack (Ø 2.5 mm)
TC LINK IN/OUT jack
Pin connector
IN: 0.5 V to 18 Vp-p, 10 kΩ (kilohms)
OUT: 1.2 Vp-p, 75 Ω (ohms)
(IN/OUT switch-able)
LCD screen
Picture
8.0 cm (3.2 type, aspect ratio 16:9)
Total dot number
921 600 (1 920 × 480)
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor/Charger)
Average power consumption
During camera recording using the
microphone ECM-XM1 and viewfinder
with normal brightness:
7.9 W
During camera recording using the
microphone ECM-XM1 and LCD with
normal brightness:
7.9 W
114
* When Flash Memory Unit HXR-FMU128 is
Operating temperature
Storage temperature
Dimensions (approx.)
Mass (approx.)
AC Adaptor/Charger AC-VL1
Power requirements
Power consumption
Output voltage
*
Operating temperature
Storage temperature
used, the average power consumption increases
about 1.1 W.
0 °C to 40 °C (32 °F to 104 °F)
-20 °C to +60 °C (-4 °F to +140 °F)
173 × 193 × 449 mm
(6 7/8 × 7 5/8 × 17 3/4 in.) (w/h/d)
including the projecting parts
173 × 193 × 449 mm
(6 7/8 × 7 5/8 × 17 3/4 in.) (w/h/d)
including the projecting parts with
battery pack NP-F570
173 × 193 × 449 mm
(6 7/8 × 7 5/8 × 17 3/4 in.) (w/h/d)
including the projecting parts with
battery pack NP-F770
2.2 kg (4 lb 15 oz) including the lens
hood with lens cover
2.5 kg (5 lb 7 oz) including battery pack
NP-F570, lens hood with lens cover and
microphone (ECM-XM1)
2.6 kg (5 lb 11 oz) including battery
pack NP-F770, lens hood with lens
cover and microphone (ECM-XM1)
AC 100 V - 240 V, 50 Hz/60 Hz
22 W
DC 8.4 V*
0 °C to 40 °C (32 °F to 104 °F)
-20 °C to +60 °C (-4 °F to +140 °F)
Advertisement
Table of Contents
