Ten Slot Charging Cradle
CAUTION
The Ten Slot Charging cradle provides power for operating and charging up to ten SB1 devices.
Setup
To setup the Ten Slot Charging cradle:
Connect the power plug of the power supply to the Power Input port on the cradle.
1.
Align the ferrite (Tube shape) into the cable holder and press into the holder.
2.
If required, wind the cable around the wire tabs to shorten the cable.
3.
Connect the AC line cord to the power supply.
4.
Connect AC Line Cord to an AC outlet.
5.
Ten Slot Charging Cradle Setup
Figure 2-3
Battery Charging
Place the SB1 into the slot with the Scan button and Charge LED Indicator facing up.
Ensure to follow the guidelines for battery safety described in
Power Input Port
Wire Tab
Power Supply
Battery Safety Guidelines on page
Power Plug
Ferrite
Accessories
2 - 5
5-1.
AC Line Cord