Accessories
8 .11 Cruciform spacer
For installation of the segmented flame tube SICAF-
LEX
®
in vertical radiant tubes. The cruciform spacer en-
sures optimum sizing of the recirculation gap between
the segmented flame tube and the burner.
Material: refractory clay.
Available on request in different sizes depending on the
SICAFLEX
®
sizes and different heights.
ECOMAX · Edition 10.17
8 .12 Flue gas guide tube FGT SET ECO . .
SER-C
To guide the flue gases if smaller burners are used
than those normally intended; see page 49 (Radiant
tubes). The flue gas guide tube ensures sufficient heat
exchange via the burner recuperator.
Material: Shaped part made of vacuum-formed
ceramic fibres (RCF).
Available on request in different sizes and versions suit-
able for the SER-C and ECOMAX burner sizes.
67