Description, Specifications And Standard Equipment Description; Specifications; Standard Equipment - RIDGID KJ-5000 Manual

KJ-5000 Water Jetting Machine
– Contact Ridge Tool Technical Service Department at
ridgid.australia@emerson.com, or call 1800 743 443.
description, Specifications
And Standard equipment
description
The RIDGID ® KJ-5000 Engine Powered Water Jetting
Machine is a portable high pressure water jetter designed
to use a combination of water pressure and flow to clear
grease, sludge, sediment and roots out of drains. A high-
ly flexible and lightweight hose is propelled through the
drain pipe by the reverse jets on the jetter nozzle, and
when retrieved scrubs the line flushing debris away. The
KJ-5000 Water Jetter equipped with a gasoline engine to
drive the triplex plunger pump. A 36 liter water tank with
low water level shut-off allows operation with low water
supply flow rates.
Fuel Tank
Handle
Engine
Engine Controls
Remote Reel
with Hose
Wash Wand
Whip Hose and Nozzle Box
Figure 1 – KJ-5000 Water Jetting Machine

Specifications

Jetter Engine Pressure
Model Displacement (PSI/BAR)
(cc)
KJ-5000 690 5075/350
4
Primary Hose Reel
Guide Hose
Water
Inlet/Supply
Water Tank
Lift Points
Pump
Battery Isolator
Flow Rate Drain Line Capacity
(LPM) (inch/mm)
23 2"/50mm - 10"/250mm
Figure 2 – Hose Reel

Standard equipment

All KJ-5000 Water Jetters come with:
• Primary hose reel with 60m of 3/8" jetter hose
• Remote hose reel with 60m of 1/4" jetter hose
• 15m flexible leader hose with nozzle
• Appropriate Jetter Nozzles
• Nozzle Cleaning Tool
• Wash wand
• Engine Operator's Manual
• Operator's Manual
See the RIDGID catalog for specific equipment supplied
with each catalog number.
Figure 3 – Machine Serial Number
Water Tank Maximum Hose Length
(liters) (meters/feet)
36L Up to 100m (328 ft)
Ball Valve
Lead Hose
with Quick
Connect
Locking Pin
Handle
Weight (kg)
(with Primary
Hose Reel, dry)
195 kg