Function Buttons And Remote Control - Hitachi UHD8410PC Instructions Manual

However, System On/Off turns on/off the system so
system will enter standby mode.
Warning!
•Remote Control may not work properly if there
would be any object under the product closer than
100cm.

Function Buttons and Remote Control

"INTERACTIVE BOARD" has 6 function buttons.
These buttons and the remote control are as following:
Remote Control
System ON / OFF
Screen Freeze / OK
Volume Down
Brightness Down
Menu
Source Select
Mute
Brightness Up
Volume Up
Display ON / OFF
Information
i
- 13 -
Replacing the Batteries
Rotate left to open
Rotate left to open
Remove the back cover to reveal the battery
compartment and make sure the batteries are inserted
the right way round. Suitable battery types for this
remote are CR2025.
Remove exhausted batteries immediately to prevent
acid from leaking into the battery compartment.
Important!
The empty batteries should be replaced with the
equivalent new batteries.
CAUTİON : Risk of explosion if battery is replaced by
an incorrect type. Dispose of used batteries according
to the instructions. Batteries must not be exposed
to excessive heat such as sunshine, fire or the like.
3v
Remove the old battery and
Install the new one w�th
the plus (+) symbol fac�ng up
+