Basic Operation - Hitachi UHD8410PC Instructions Manual

BASIC OPERATION

1-17. ON/OFF
2-16. Source Select (Input mode selection)
• You can select the input source by pressing the
input switch of the product.
Tips
• The input mode is automatically changed to mode
which is actively used by an external source.
3. Touch Screen (On/Off) Button
• Turns on/off the touch screen.
4. Volume/Brightness Button
• You can select the Volume or Brightness by pres-
sing the Volume/Brightness switch of the product.
5-6. Up/Down +/- (Volume/Brightness adjustment)
• Pressing Up(+) or Down(-) buttons display the
VOLUME or BRIGHT menu.
Use these buttons to adjust the volume of the sound
or adjust the brightness.
If you do not press any buttons for about 3 secon-
ds, the VOLUME or BRIGHT menu automatically
disappears.
7-8. Brightness +/- (Brightness adjustment)
• Pressing Brightness Up(+) or Brightness Down(-)
buttons display the BRIGHT menu.
• Display On/Off button only turns on/off the monitor so system will not enter standby mode.
Status of LED
ON
OFF
Tips
• After turning the product off, it will automatically
enter standby mode approximately 60 sec. later.
6
17
15
5
4
11
16
3
2
1
Use these buttons to adjust the brightness.
If you do not press any buttons for about 3 seconds,
the BRIGHT menu automatically disappears.
9-10. Vol +/- (Volume adjustment)
• Pressing Volume Up(+) or Volume Down(-) buttons
display the VOLUME menu.
Use these buttons to adjust the volume of the sound.
If you do not press any buttons for about 3 seconds,
the VOLUME menu automatically disappears.
11. Menu
• Turns On/Off the touch screen.
12. Mute
• Turns off the volume temporarily.
• Press the MUTE button again to turn the sound
back to the previous level.
13. Display On/Off
• Turns on/off the monitor.
14. Information
• Displays the mode which is displayed by monitor at
that time.
Tips
- 12 -
Status of the Monitor&PC
Power Off / Standby mode
On
12
7
9 10
8
13
14