Technical safety
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised registered gas
installer.
Damage to the wok can compromise your safety. Check the wok
for visible signs of damage. Do not use a damaged wok.
Reliable and safe operation of the wok can only be assured if it
has been connected to the mains electrical supply.
The electrical safety of this wok can only be guaranteed when
correctly earthed. It is essential that this standard safety requirement
is met. If in any doubt please have the electrical installation tested by
a registered electrical worker.
To avoid the risk of damage to the wok, make sure that the
connection data on the data plate (voltage and frequency) match the
mains electricity supply before connecting it to the mains. Consult a
registered electrical worker if in doubt.
Do not connect the wok to the mains electricity supply by a multi-
socket unit or an extension lead. These do not guarantee the
required safety of the appliance (fire hazard).
For safety reasons, this wok may only be used after it has been
built in.
This wok must not be used in a non-stationary location (e.g. on a
ship).
Never open the casing of the wok.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
Warning and Safety instructions
9