D-Link AirPro DWL-AB650 Installation Manual page 17

802.11a and 802.11b multimode wlan cardbus adapter

Hide thumbs Also See for AirPro DWL-AB650:

Table of Contents

Selecting the IP Settings

The D-Link AirPro Management Utility allows you to choose between the

IP settings entered for your new Cardbus Adapter using the Management

Utility (as illustrated above) or using IP settings entered using the Microsoft

Windows Networking and Dial-up Connections folder (located in the

Windows Control Panel)

The default setting of the D-Link AirPro Management Utility is to use the

Windows IP settings. To use the settings entered into the AirPro

Management Utility, you must click on the Option tab, and the click the

Enable profile IP Settings click-box. If this click-box is left blank, the

AirPro Management Utility will use the IP settings entered using Windows

Networking and Dial-up Connections folder.

Note: if you use the Enable profile IP Settings option, the AirPro

Management Utility will save the Windows IP settings for the Cardbus

Adapter. This allows you to have two different IP settings for the same

Cardbus Adapter − one for the office, and one for the home, for example.

The AirPro Management Utility will display the following dialog box to

confirm that the Windows IP settings are being backed-up:

Table of Contents