General Power Tool Safety Warnings - Makita HM1317C Instruction Manual

Vibration
The vibration total
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model HM1317CB
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Electric Breaker
Model No./ Type:
HM1307C,HM1307CB,HM1317C,HM1317CB
are of series production and
value (tri-axial vector
2
) : 8.5 m/s
h,CHeq
2
) : 81 dB(A)
pA
) : 101 dB(A)
WA
value (tri-axial vector
2
) : 7.0 m/s
h,CHeq
2
as the responsible
ENG216-2
Conforms to the following European Directives:
2000/14/EC, 98/37/EC until 28th December 2009
sum)
and then with 2006/42/EC from 29th December
2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
ENG102-2
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex
VIII.
Notified Body:
TUV
identification no. 0197
Model HM1307C
ENG216-2
Measured Sound Power Level: 101dB
sum) Guaranteed Sound Power Level: 103dB
Model HM1307CB
Measured Sound Power Level: 101dB
Guaranteed Sound Power Level: 104dB
ENG901-1
Model HM1317C
Measured Sound Power Level: 101dB
Guaranteed Sound Power Level: 103dB
Model HM1317CB
Measured Sound Power Level: 101dB
Guaranteed Sound Power Level: 104dB
000230
ENH213-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
3
Rheinland Product
8th April 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
Safety GmbH,
GEA005-3