Connect To An Ethernet Network; Connect To An Usb Device - Honeywell Dolphin CT40 User Manual

Connect to an Ethernet Network

1. Plug the Ethernet cable into the dock.
2. Place the CT40 computer in the dock.
Note: For advanced Ethernet settings, go to
User Guide.

Connect to an USB Device

Note: See
Note: The dock supports USB direct connections only. The dock does not support USB hub
connections, including keyboards with USB port(s).
Plug the USB type A cable into a USB port on the dock.
Dolphin CT40 Display Dock
USB Devices for a list of approved USB devices.
www.honeywellaidc.com for the Dolphin CT40
3