User Program - Sharp AR-151 Service Manual

AR-F152
3. Operation panel
20
Exposure mode selector key and indicators
Use to sequentially select the exposure modes: AUTO,
1
MANUAL or PHOTO. Selected mode is shown by a lit
indicator.
Alarm indicators
:Developer replacement required indicator
3 :Misfeed indicator
:TD cartridge replacement required indicator
:Maintenance indicator
SPF misfeed indicator
5
(AR-156, AR-F152 only)
7 Zoom indicator
Display
9 Displays the specified copy quantity, zoom copy ratio,
user program code, and error code.
ON LINE KEY
Changes between the on-line and off-line modes when
the PCL expansion kit has been installed and a PCL
printer is used.
11
Changes modes from the off-line to on-line when the
GDI expansion kit has been installed and a GDI printer
is used.
(AR-151, AR-156 only)
Power save indicator
13
Lights up when the copier is in a power save mode.
Paper feed location indicators
15
Light up to show the selected paper feed station.
Copy quantity keys
17 • Use to select the desired copy quantity (1 to 99).
• Use to make user program entries.
Print key and ready indicator
19 • Copying is possible when the indicator is on.
• Use to set a user program.
1 2 3 4 5
14 15
6 7 8
16
Light and dark keys and exposure indicators
Use to adjust the MANUAL or PHOTO exposure level.
2
Selected exposure level is shown by a lit indicator.
Use to start and terminate user program setting.
SPF indicator
4
(AR-156, AR-F152 only)
Copy ratio selector key and copy ratio indicators
Use to sequentially select preset reduction/enlargement
6
copy ratios.
Selected copy ratio is shown by a lit indicator.
8 Copy ratio display (%) key
ON LINE indicator / ON LINE KEY
Lights up when the machine is used as a printer.
10 To use as a printer, an optional printer expansion kit is
needed.
(AR-151, AR-156 only)
DATA indicator
Indicates that the printer is receiving or processing print
12 data. To use the copier as a printer, an optional PCL
expansion kit is needed.
(AR-151, AR-156 only)
Tray select key
14 Use to select a paper feed station (paper tray or
bypass tray).
Zoom keys
16 Use to select any reduction or enlargement copy ratio
from 50% to 200% in 1% increments.
Clear key
• Press to clear the display, or press during a copy run
18 to terminate copying.
• Press and hold down during standby to display the
total number of copies made to date.
Duplex Mode select key and indicator
20
(AR-156 only)
4 – 2
9 10 11 12 13
17 18 19