Automatic Heat Up; Minute Minder - Zanussi ZCI66050BA User Manual

AUTOMATIC HEAT UP

If you activate this function you can get a necessary
heat setting in a shorter time. The function sets the
highest heat setting for some time and then
decreases to the correct heat setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking zone:
turn the knob for a cooking zone to position A.
comes on in the display. Immediately set the
correct heat setting.
To deactivate the function: turn the knob to the
off position.
POWERBOOST
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
To activate the function for a cooking zone:
touch . comes on.
To deactivate the function: change the heat
setting.
TIMER
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single cooking
session.
First set the heat setting for the cooking zone then
set the function.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch
to set the time (00 - 99 minutes). When the
indicator of the cooking zone starts to flash slowly
the time counts down.
To see the remaining time: set the cooking zone
with . The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
To change the time: set the cooking zone with
. Touch or .
To deactivate the function: set the cooking zone
with and touch . The remaining time counts
back to 00. The indicator of the cooking zone goes
10
out. To deactivate the function you can also touch
and
To stop the sound: touch
CountUp Timer (The count up timer)
You can use this function to monitor how long the
cooking zone operates.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch
comes on. When the indicator of the cooking
zone starts to flash slowly the time counts up. The
display switches between
(minutes).
To see how long the cooking zone operates:
set the cooking zone with
cooking zone starts to flash quickly. The display
shows how long the zone operates.
To deactivate the function: set the cooking zone
with
cooking zone goes out.

Minute Minder

You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows
To activate the function: touch
of the timer to set the time. Cooking zones
again and
display deactivates automatically after 10 seconds.
When the time comes to an end, the sound
operates and 00 flashes.
of the timer
To stop the sound: touch
To deactivate the function: activate for a short
time and deactivate left front cooking zone.
PAUSE
This function sets all cooking zones that operate to
the lowest heat setting.
The function does not stop the timer functions.
Touch
comes on. The heat setting is lowered to 1.
at the same time.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
and counted time
. The indicator of the
and touch or . The indicator of the
The function has no effect on the
operation of the cooking zones.
to activate the function.
.
again and
of the timer.
.
. Touch or
.