Honeywell L-VCP06D Series Manual

L-VCP06D Series
Ceiling Loudspeaker
Full-range 4" ceiling loudspeaker, which features five
power taps at 100V line for 6W, 3W, 1.5W, 0.75W and
0.375W outputs. An optional surface mount box is
available for solid ceiling or wall installation.
L-VCP06D-W provides a general application ceiling
mount speaker in white finish.
L-VCP06D-BK provides a black version of L-VCP06D-W
L-SMB-W provides an optional surface mount box for
L-VCP06D-W in white finish for solid ceiling or wall
installation.
L-SMB-BK provides a black version of L-SMB-W.

Technical Specifications

Electrical
Max power
Rated power
Power tapping
Sound pressure level
at 1W/4m,( )
100Hz~10kHz
SPL(1W/1m,100Hz~10kHz)
SPL(6W/4m,100Hz~10kHz)
frequency response( )
-10dB
frequency response( )
-10dB
Rated input voltage
Rated impedance
Connection
Mechanical
Dimensions
Hole cut-out size
Weight
Speaker size
Color
Grill
Surface Mount Box
Environmental
IP Rating
Operating temperature
Storage temperature
Relative humidity
The reference axis is perpendicular to the centre point of the front grille
The reference plane is perpendicular to the centre of the reference axis
The horizontal plane is perpendicular to the centre of the reference plane
The spec/data was measured using a standard baffle mounting in an anechoic
chamber as described in EN54-24
DoP No.: CPR-DoP- 018001 2
For more information , please refer to our website
9 W
6 W
6/3 /1.5 /0.75/0.375(W)
79 dB
91 dB
86 dB
200Hz~15KHz
(speaker)
200Hz~15KHz
(Speaker installed with surface mount box)
100 V
1.7/3.3/6.7/13.3/26.7
kΩ
unique terminal housing
Φ160x76.5mm
Φ140mm
0.7kg
(speaker)
0.5kg
(surface mount box)
4 inch
White RAL 9003 / Black RAL 9004
Powder
coated
steel
Φ280x75mm
Type A(AS7240.24) / IP21
-25℃ to +55℃
-40℃ to +70℃
<95%
www.honeywell.com
1008-CPR-MC 69258358 0001
Clear and intelligible audio performance
Stylish and unobtrusive design
Simple power settings
Compact and high strength fire resistant ABS plastic
Flush-mounting system for fast and easy installation
Environment friendly
Complying with AS7240.24,Type A
Complying with EN54-24,Type A
IP21C rated
Installation/Configuration Notes
Mounting
The assembly is quickly installed into the hole on the
ceiling or surface mount box secured by two built-in
spring ceiling locking clamps (It's suitable for ceilings
with a thickness of 9mm to 25mm). The spring locking
clamps are provided with protective rubber to protect
soft ceiling material.
WARNING: Installation should be performed by
competent persons in accordance with the
relevant standards
installation. Honeywell Ltd accepts absolutely
no liability for the suitability or placement of the
speakers within an installation.
Power setting
The unit has a unique terminal block with screw
connections suitable for loop connection. Five primary
taps are provided on the matching transformer to allow
selection of 6W, 3W, 1.5W, 0.75W, 0.375W.
Φ160mm
Φ140mm
Dimensions in mm
1008
18
as required for the
76.5mm
1