The Nuts Of The Volume Knob And Channel Knob; Screw Sequence For Mounting The Tx-Rx Unit To The Chassis - Kenwood TK-2317 Service Manual

TK-2317
10. The Nuts of the Volume Knob and
Channel Knob
Note that the shapes, colors and heights of nuts of the
volume knob and selector knob are different from one
another. (The nut of volume knob is silver, and the nut of
selector knob is gold)
Use the following jig when removing the nuts of the vol-
ume knob and selector knob.
• Jig (Part No.: W05-1012-00)
11. Screw sequence for mounting the TX-
RX unit to the chassis
Attach the TX-RX unit to the chassis using the screws in
the order shown in the drawing below.
20
DISASSEMBLY FOR REPAIR / 维修拆卸
for Volume knob
(Long)
音量旋钮的螺母
（长）
k
j
TX-RX UNIT
Component side view
i
h
10. 关于音量旋钮和选择器旋钮的螺母
音量旋钮和选择器旋钮的螺母形状不同，颜色高度也不同，
因此请注意。( 音量旋钮螺母为银色，选择器旋钮的螺母
为金色 ) 另外，拆卸音量旋钮和选择器旋钮的螺母时，请
使用下列夹具。
• 夹具 ( 零件号∶ W05-1012-00)
for Selector knob
(Short)
选择器旋钮的螺母
（短）
11. 安装收发单元到机架上的螺钉顺序
利用下图所示的螺钉顺序安装收发单元到机架上。
d
a
b e
c f
g