Linksys WUSB54AG User Manual page 12

Figure 6-2
3. The next screen shows that the Wizard is complete. Click the
Finish button. The drivers are now installed.
Windows XP Wireless Zero Configuration
Note for Windows XP users: Windows XP has a built-in configuration tool. Use Windows XP
Wireless Zero Configuration (in the system tray at the bottom of your screen) to configure the Adapter.
1. After installing the Adapter, the Windows XP Wireless Zero Configuration icon will appear in your
computer's system tray (see Figure 6-3). Double-click the icon.
Figure 6-3
Note: Steps 2 and 3 are the instructions and screenshots for Windows XP with Service Pack 1 installed.
If you have not installed Service Pack 1, select the network you want, and click the Connect button. If
the network has WEP encryption enabled, enter the WEP key in the Network key field, and then click
the Connect button.
2. The screen that appears will show any available wireless network. Select the network you want.
If this network has WEP encryption enabled, go to step 3.
If this network does not have WEP encryption enabled, then Figure 6-4 will appear. Make sure the
box next to Allow me to connect to the selected wireless network, even though it is not secure is
checked. Then click the Connect button, and go to step 4.