Cisco ASA Series Cli Configuration Manual page 1716

Supporting a Zone Labs Integrity Server
•
•
•
•
•
•
In many instances, you define the webvpn attributes as part of configuring clientless SSL VPN, then you
apply those definitions to specific groups when you configure the group-policy webvpn attributes. Enter
group-policy webvpn configuration mode by using the webvpn command in group-policy configuration
mode. Webvpn commands for group policies define access to files, URLs and TCP applications over
clientless SSL VPN sessions. They also identify ACLs and types of traffic to filter. Clientless SSL VPN
is disabled by default. See the description of
information about configuring the attributes for clientless SSL VPN sessions.
To remove all commands entered in group-policy webvpn configuration mode, enter the no form of this
command. These webvpn commands apply to the username or group policy from which you configure
them.
hostname(config-group-policy)# webvpn
hostname(config-group-policy)# no webvpn
The following example shows how to enter group-policy webvpn configuration mode for the group
policy named FirstGroup:
hostname(config)# group-policy FirstGroup attributes
hostname(config-group-policy)# webvpn
hostname(config-group-webvpn)#
Applying Customization
Customizations determine the appearance of the windows that the user sees upon login. You configure
the customization parameters as part of configuring clientless SSL VPN. To apply a previously defined
web-page customization to change the look-and-feel of the web page that the user sees at login, enter the
customization command in group-policy webvpn configuration mode:
hostname(config-group-webvpn)# customization customization_name
hostname(config-group-webvpn)#
For example, to use the customization named blueborder, enter the following command:
hostname(config-group-webvpn)# customization blueborder
hostname(config-group-webvpn)#
You configure the customization itself by entering the customization command in webvpn mode.
The following example shows a command sequence that first establishes a customization named 123 that
defines a password prompt. The example then defines a group policy named testpolicy and uses the
customization command to specify the use of the customization named 123 for clientless SSL VPN
sessions:
hostname(config)# webvpn
hostname(config-webvpn)# customization 123
hostname(config-webvpn-custom)# password-prompt Enter password
hostname(config-webvpn)# exit
hostname(config)# group-policy testpolicy nopassword
hostname(config)# group-policy testpolicy attributes
hostname(config-group-policy)# webvpn
Cisco ASA Series CLI Configuration Guide
1-82
sso server (single-signon server)
auto-signon
deny message
AnyConnect Secure Mobility Client
keep-alive ignore
HTTP compression
Chapter 1 Configuring Connection Profiles, Group Policies, and Users
Chapter 77, "Configuring Clientless SSL VPN" for more