Table of Contents
Advertisement
Fitting an ePop-Loq case
Step 1. Ensure the mobile terminal is fitted into its ePop-Loq
case before attaching the case to the IH21 UHF RFID
Reader. This prevents over-flexing of the case.
Step 2. Make sure all of the contacts - on both the ePop- Loq
socket and stud - are clean and free from dirt or debris.
Step 3. Align the ePop-Loq stud with the ePop-Loq socket -
ensuring that the front of the host device is pointing
towards the antenna - and press the two parts together
until they click into place.
Step 4. To remove the ePop-Loq case, pull in the opposite
direction. Do not twist the devices when separating.
Front of host
device
Make sure
contacts are
clean
Advertisement
Table of Contents
