Setting Ir Side - ABB A43 User Manual

Meter Settings

4.1.11 Setting IR Side

The IR Side uses the M-Bus and the EQ-Bus
IR Side communication depending on protocol, perform the following steps:
Step
1
2
3
4
5
6
i. EQ-Bus is a communication protocol designed for internal communication with ABB meters.
2CMC48001M0201
Revision: C
Step EQ-Bus
Press once to get to the next
4
menu. The display will show the
baudrate. See table
baudrate options. Set baudrate.
Press once to get to the next
5
menu. The display will show the
address. See
Table 4:5
range. Set address.
Press once to get to the next
6
menu. The display will show the
Oct. TO. See
Table 4:5
Set Oct. TO
Press once to get to the next
7
menu. The display will show the
Inac. TO. See
Table 4:5
Set Inac. TO
Press once to get to the next
8
menu. The display will show if the
password is to be reset. See
for options. Set the option.
Table 4:5
M-Bus
Choose the Settings icon in the
main menu, press
Choose IR Side, press
Press and choose M-Bus.
Press once to get to the next
menu. The display will show the
baudrate. See
Table 4:5
drate options. Set baudrate.
Press once to get to the next
menu. The display will show the
address. See
Table 4:5
range. Set address.
Press once to get to the next
menu. The display will show the
access level. See
Table 4:5
tions. Set the access level.
The protocol is based on the following standards; IEC 62056-42, IEC 62056-46, IEC 62056-
53, IEC 62056-61, IEC 62056-62.
Modbus
Press
menu. The display will show
for the baudrate. See
Table 4:5
baudrate options. Set baudrate.
Press
menu. The display will show
for address the address. See
address range. Set address.
Press
menu. The display will show
for options. the Parity. See
tions. Set Parity.
for options.
i
protocol to communicate. To set the
EQ-Bus
Choose the Settings icon in the
. main menu, press
. Choose IR Side, press
Press
Press
menu. The display will show the
for bau- baudrate. See
options. Set baudrate.
Press
menu. The display will show the
for address address. See
range. Set address.
Press
menu. The display will show the
for op- Oct. TO. See
Set Oct. TO.
39
once to get to the next
for
Table 4:5
once to get to the next
for
Table 4:5
once to get to the next
for op-
Table 4:5
.
.
and choose EQ-Bus.
once to get to the next
for baudrate
Table 4:5
once to get to the next
for address
Table 4:5
once to get to the next
for options.
Table 4:5
A43/A44
User Manual