Stopping Engine; Procedure For Stopping Engine - Yamaha F225 Owner's Manual

Operation
r/min. The display will show the engine
speed when the engine speed is increased
from the fully closed position during trolling
speed setting mode. When the throttle is re-
turned to the fully closed position, the display
will show the trolling speed again. When the
engine is turned off or when the engine
speed exceeds 3000 r/min, trolling speed
setting mode will be released.
For details, see the attached operation man-
ual.
66
ZMU06309
SET
CANCEL
Troll stop
MENU
ZMU07256
ZMU08536
TIP:
Trolling is affected by currents and other

operating conditions and may differ from
the actual engine speed.
When warming up a cold engine, the troll-

ing speed cannot be decreased below the
specified engine idle speed.
EMU27822

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU41912

Procedure for stopping engine

1. The engine can be turned off either by
pressing the Start/Stop button or by turn-
ing the main switch to the "
sition. After the engine has been turned
off using the Start/Stop button, turn the
main switch to the "
ON
OFF
" (off) po-
" (off) position.
ZMU07171
ZMU07148