Advertisement
Manual Pipe Threader Instructions
beyond this point would make a straight or running
thread.
9. When the thread is complete, back off the die head by
reversing the ratchet mechanism and turning the die
head in the opposite direction. When the dies are
nearly removed from the thread, maintain close control
of the threader so that the threads are not damaged
when removing the die head.
NOTE! Clean any oil spill or splatter that is on the
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
ground. At the end of each job, always clean
your threader and store in a clean dry area to
protect against damage.
Advertisement
