ABB i-bus KNX Product Manual page 189

®
ABB i-bus KNX
Parameters
7.11.1.5.2 —
Dependent parameter
Distinction between long and short operation
Options:
This parameter determines whether the input differentiates between short and long operation.
•
yes: After opening/closing the contact, it must first of all be ascertained if a long or short operation has
occurred. Then a possible reaction will be triggered.
The following diagram shows the function in detail:
Fig. 23: Distinguishing between a long/short operation
T is the time before a long operation is detected.
L
No
Yes
Note
VC/S 4.x.1 | 2CDC508220D0211 Rev. A 187