Turning On/Off The Bluetooth; Handling The Ge006 Blood Glucose Test Strip - GE GE006 Manual

Turning On/ Off the Bluetooth
1. Auto turn on the Bluetooth
After leaving the Setting mode, the Bluetooth will turn on automatically and the
" " symbol blinks on the screen.
2. Turn off the Bluetooth
In Time mode, press and hold the Right or Left button for two seconds. The
blinking " " symbol will switch to the "
turned on).
3. Manual turn on the Bluetooth
In Time mode, press and hold the Right or Left button for two seconds. The
" " symbol will switch to the blinking "
turned on).
NOTE
1.The blinking " " symbol should turn to steady immediately when
the Bluetooth connection is established.
2. Blinking back and forth " " symbol on the screen means the
meter is transferring data.
22
1)
2)
" symbol with a beep (If Volume is
" symbol with a beep (If Volume is
1
How to handle the GE006 Blood Glucose Test Strip.
Inserting the GE006 Blood Glucose Test Strip:
1. Hold the GE006 Blood Glucose Test Strip between your thumb and middle
finger with the view window "
2. Put your forefinger on the side of the strip as shown.
3. Insert the GE006 Blood Glucose Test Strip into test strip port until it clicks
and firmly stops.
2

Handling the GE006 Blood Glucose Test Strip

" facing up.
1
2
3
23