Warranty - Honeywell NFPA 1971 User's Information Manual

User Information Guide – Protective Garments for Structural and Proximity Fire Fighting (NFPA 1971)
Step 20 – For
exterior hook and
dee systems
(please see 20A if
your hooks and
dees are covered
by the storm
shield). Attach the coat's hook and dees and
connect the reverse hook to the bent dee.
Step 20A – The
concept is the
same for garments
with internal hooks
and dees (covered
by the storm shield
when closed) but
looks a little
different. Attach the coat' s hook and dees and
connect the reverse hook to the bent dee.
Step 21 – Don the coat and make any comfort ad-
justments to settle the DRD into place.
After you have installed the positive closure articulat-
ing metro DRD, you should don the coat and make
any comfort adjustments to settle the DRD into
place. You will note while donning and securing the
front coat closure that the reverse hook and bent dee
of the positive closure DRD must be connected,
securely snapped together and in the center chest
area in order to complete the DRD encirclement of
the chest and affect positive closure. Doffing only
requires unsnapping of this reverse hook from the
bent dee.
Honeywell First Responder Products
Honeywell
#1 Innovation Court
Dayton, OH 45414
Tel: 800-688-6148
ISO 9001:2015
www.HoneywellFirstResponder.com
Exterior dees coat
fully assembled
Dees covered by
shield coat fully
assembled.
DRD Removal – If the DRD is removable, follow the
instructions provided for the installation of the
respective DRD, but perform the steps in the reverse
order. Have your DRD inspected by a qualified person
within your department or organization following its
removal to ensure its continued serviceability.
DRD Cleaning - If removable, remove the DRD and
place in an open mesh laundry bag. Launder DRD with
garment outer shells. After drying, reinstall the DRD
into coat per the instructions according to the specific
type of DRD.
99-BK-S01
Rev. March 2018
© 2018 Honeywell International Inc.

Warranty

Honeywell warrants that all Morning Pride® TAILS™,
VIPER, RANGER™, VE & EDGE and Honeywell first
responder protective clothing is free from defects in
material and workmanship for the useful life of the
product. This warranty specifically excludes accidental
damage (acid, tears on nails, etc.), intentional or
unintentional abuse, natural disasters, damage
caused by disregard of care instructions, and normal
wear. THESE WARRANTIES ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, WHETHER
WRITTEN, EXPRESS, IMPLIED, STATUTORY OR
OTHERWISE. A full warranty statement can be found
at www.HoneywellFirstResponder.com.
Contact Information
If you have questions or require more information,
contact Honeywell First Responder Products.
1 6 5 /
1 6 5 /
1 6 5 /