Setting The Logging Interval - Pioneer SGX-CA600 User Manual

If you press the [→] button, the log data deletion confirmation message
appears.
If you press the [Confirm] button, the log data is deleted and the meter
screen reappears.
Note
! You can also save the log data by pressing and holding the [Lap] button
for 2 seconds or more in the logging stopped state.
! When the capture function is enabled, the function to save the logging
data by pressing and holding the [Lap] button while logging is stopped
will not work.

■Setting the Logging Interval

The device saves the various data during logging at a set interval.
Select from [Auto], [1 sec]*, [3 sec], [5 sec], and [10 sec] for the setting.
If the interval is set to [Auto], the logging interval becomes shorter when the riding
speed of the bike increases and longer when the riding speed decreases.
*: Factory default setting
Note
! The maximum file size for log data that can be analyzed in Cyclo-Sphere
is 16 MB.
The file size for one hour of log data is approximately 1 MB.
The size differs depending on the sensors connected and settings.
! When performing logging for a long time such as on a long ride or when
randonneuring, we recommend setting this to [3 sec] or [Auto].
1
Press the [Menu] button.
57