Honeywell EVCS-CMPT9 Installation, Commissioning And Maintenance Manual page 15

View Panel Version
The View panel version option will show the EVCS-CMPT9 current software revision and the software version of any EVCS-XC10
Panel Version:Master
slave attached.
Version:1.0
Build:1122
Build Date 02:03:11
Pressing up and down will switch from master to slave, pressing TICK will exit.
Set time+date
Scroll through the root menu using the navigation keys until Set time+date is selected. Press TICK to show the Set time+date
Set time+date
menu.
Date >01|01|11
Time 14:15:06
:Next
This menu shows the current date and time in the following format:
Day|Month|Year
Hour:Minute:Second
The cursor will be on the first option: Day. Use the navigation keys to select the correct day then press TICK to move to the Month
option. Repeat until the current date and time are set and the next option is selected.
Most configuration menus will have the same options located in the bottom right of the LCD screen: Next, Save, and Quit. Pressing
the TICK button selects the option chosen:
Next: Moves cursor back to first option on screen.
Save:
Stores information and moves back to the previous menu screen.
Quit: Discards all information on screen, and moves back to the previous menu screen.
Use the navigation keys to select Next, Save, or Quit as desired, then press TICK. Both Save and Quit will go back to the
root menu.
www.acornfiresecurity.com
14
www.acornfiresecurity.com