Canon Inner Finisher-A1 Service Manual page 70

5
Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
26) Pass the interface cable through the wire saddle fixed at Step 22 and attach the
connectors to the host machine connectors.
x2
28) Fix the supplied front lower cover with 1 screw (RS-tight screw, M3x6).
x1
5 Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
27) Fix the front silver cover with 2 screws removed at Step 8.
(Left:TP screw, Right:RS-tight screw)
x2
F-5-30 F-5-30
29) Fix the magnet catcher with 1 screw removed at Step 7.
x1
F-5-32 F-5-32
5-12
F-5-31 F-5-31
F-5-33 F-5-33
5-12