Pc Interface Kit (Part No. Fs10-Ik) - Honeywell FS10-R Installation Manual And Operating Manual

OPERATOR MANUAL // SECTION 6: ACCESSORIES
6.6

PC Interface Kit (Part No. FS10-IK)

The PC Interface Kit electronically converts the Detector's RS-485
digital output (FireBus) signal into a standard RS-232 signal for
interfacing to an IBM type PC computer. This optional interface Kit
allows access to post event analysis (FirePic), as well as
monitoring the Detector's operation (SnapShot). Post event
analysis includes the Detector's time and date stamp of ALERT,
ALARM and FAULT histories (Event History).
The PC Interface Kit includes; a self-powered (internal
rechargeable battery) terminal box with two connecting cables, a
120 VAC wall transformer for recharging the battery, and User PC
software.
Note : The PC Interface Kit may also be used with a Detector that is
powered by an external 24 VDC source (a complete user
instruction is included with the Interface Kit).
HONEYWELL 24