Error Messages - Sharp MD-MX30 Operation Manual

ERROR MESSAGES

When an error message is displayed, proceed as follows:
Error messages
BLANK MD Nothing is recorded.
(Neither music nor disc name is recorded.)
CAN'T COPY You tried to record from a copy prohibited CD.
CAN'T READ The disc is damaged.
( :Number or
TOC information cannot be read.
symbol)
MiniDisc not specified.
CAN'T EDIT A track cannot be edited.
CAN'T REC Recording cannot be performed correctly due
to vibration or shock in the unit.
CAN'T WRITE The TOC information could not be created prop-
erly due to a mechanical shock or to scratches
on the disc.
DISC FULL The disc is out of recording space.
E-CD 20 The CD tray is not working properly.
E. OVER You chose 21 or more tracks for track editing.
EDIT OVER There is no space to make CD editing on the
disc.
Er-MD A MiniDisc is not working properly.
( :Number or
symbol)
NAME FULL The number of characters for the disc name or
track name exceeds 40.
NO DISC A MiniDisc has not been loaded.
The MiniDisc data cannot be read.
A CD has not been loaded.
The CD data cannot be read.
NOT AUDIO The data recorded on this disc is not audio data.
PLAY MD You tried to record on a playback-only disc.
PROTECTED The disc is write protected.
The temperature is too high.
TEMP OVER
TOC FORM TOC information recorded on the MD does not
( :Number or match the MiniDisc specifications or it cannot
symbol) be read.
TOC FULL There is no space left for recording track num-
bers.
TOC FULL 1 There is no space left for recording character
information.
? DISC The data contains an error.
MiniDisc not specified.
Meaning
39
Remedy
For playback, replace it with a recorded Mini-
Disc.
Replace the CD.
Replace it with another disc.
Erase the disc and try recording again.
Change the stop position of the track and then
try editing it.
Re-record or replace the MiniDisc.
Set this unit to the stand-by mode and try to
write the TOC again. (Remove any source of
shock or vibration while writing.)
Replace the disc with another recordable disc,
or erase some of the tracks on the disc to free
up recording space.
Set this unit to the stand-by mode and turn the
power on again.
Decrease the number of tracks.
Replace it with a disc that has enough time to
record.
Set this unit to the stand-by mode and turn the
power on again.
Shorten the disc or track name.
Load a MiniDisc.
Reload the MiniDisc.
Load a CD.
Reload the CD.
Select another track.
Replace the disc.
Replace it with another recordable disc.
Move the write protection tab back to its origi-
nal position.
Set this unit to the stand-by mode and wait for
a while.
Replace it with another disc.
Erase the disc and try recording again.
Replace it with another recordable disc.
Replace it with another recordable disc.
Erase the needless characters.
Replace it with another disc.