Sound Control - Sharp MD-MX30 Operation Manual

SOUND CONTROL

Volume
(Main unit)
0
(Main unit operation)
When the VOLUME control is turned clockwise, the vol-
ume will increase. When it is turned counterclockwise,
the volume will decrease.
(Remote control operation)
Press the VOLUME button to increase the volume and
the VOLUME button to decrease the volume.
Servo Powered Volume:
(Main unit)
The VOLUME control automatically comes out when the
power is turned on, and goes back when the unit is set to
the stand-by mode.
When the power is turned on, you can put the VOLUME
control in and out by pressing the VOLUME SELECT but-
ton.
Note:
Do not push in the VOLUME control forcibly with your fin-
ger as this may damage the unit.
Pre-programmed equalizer
(Main unit)
FLAT
SOFT
When the EQUALIZER button is pressed, the current
mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly.
FLAT: The sound is not modified.
HEAVY: Bass and treble are emphasized.
VOCAL: Vocals (midrange tones) are emphasized.
SOFT: Treble is reduced.
(Remote control)
15 MAX
(Remote control)
VOLUME
SELECT
(Remote control)
EQUALIZER
HEAVY
VOCAL
Extra bass (X-BASS)
(Main unit)
X-BASS
Press the X-BASS button to emphasize the bass region
of the frequency spectrum.
"X-BASS ON" will appear.
Press the X-BASS button again to cancel the extra bass
mode.
"X-BASS OFF" will appear.
Note:
Turn the X-BASS to the off position when playing the unit
at high volume levels to avoid speaker distortion.
Surround
(Main unit)
SURROUND
Press the SURROUND button to widen the soundstage
and surround you with sound.
"SURROUND" will appear.
Press the SURROUND button again to cancel the sur-
round mode.
"PASS" will appear.
12
(Remote control)
X-BASS
X-BASS
(Remote control)
SURROUND
SURROUND