Using External Units - Sharp MD-MX20 Operation Manual

USING EXTERNAL UNITS

Connecting external units
Before connecting external units, set this unit to the stand-by mode and turn off the power to the external units.
The other MD/CD player
T o t h e o u t p u t /
headphone jack
To the analog
output jacks
LEFT
Commercially available RCA cord
Headphones
Notes:
Before plugging in or unplugging the headphones, make sure the volume level is reduced.
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 ohms and 50 ohms impedance.
The recommended impedance is 32 ohms.
When headphones are connected, the speakers are disabled automatically.
Adjust the VOLUME control for the desired headphone volume.
Commercially available cord
with 1/8" (3.5 mm) stereo
mini-plug and RCA plugs
RIGHT
RIGHT
RIGHT
34
LEFT
LEFT
Red plug
White plug
To RIGHT
To LEFT