Sharp XV-Z20000 Operation Manual page 10

Projector (Rear View)
47
Intake vent
Kensington Security
Standard connector
47
Exhaust vent
11
Remote control
sensor
25
AC socket
Connect the sup-
plied power cord.
Terminals
Terminal
COMPONENT/RGB1, 2 terminals
Connecting video equipment with component output terminal (DVD player, etc.) or a com-
puter with analog RGB output terminal.
S-VIDEO terminal
Connecting video equipment with S-video output terminal (DVD player, VCR, etc.).
VIDEO terminal
Connecting video equipment without S-video output terminal.
DVI terminal
Connecting video equipment with DVI output terminal (DVD player, DTV decoder, computer,
etc.).
HDMI1, 2 terminals
Connecting video equipment with HDMI output terminal.
RS-232C terminal
Connecting a computer to control the projector.
TRIGGER terminal
When the projector is turned on, a control signal (DC 12V) outputs from this terminal. If an
electric screen or other compatible device is connected, it can be turned on when the projector
is turned on.
WIRED REMOTE control input terminal
Connecting the remote control via a cable when the projector is placed out of the reach of
remote control signals.
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System.
Refer to the information that came with the system for instructions on how to use it to secure the projector.
Description
47
Intake vent
Page
20, 21
22
22
18-20, 23
18
24
—
10
-9