Using Dolby Virtual (Dvd Only) - Sharp DV-L70BL Operation Manual

Using Dolby Virtual (DVD only)

• Your DVD player has built-in virtual surround circuitry that provides rich
audio output when playing through a stereo (2-channel) television or through
audio equipment.
• Dolby Virtual lets you play audio from DVDs recorded using Dolby Digital
(5.1 channel) and Dolby Surround (Pro Logic).
• See the disc jacket for information about how its audio was recorded.
Dolby Virtual
The following table shows the types of audio recordings for which Dolby Virtual
is enabled.
Dolby Digital
(5.1 channel)
Yes
• Dolby Virtual is disabled when the DVD player is connected to external
equipment over an optical digital connection.
BACKLIGHT
OPERATE
HI/LOW/OFF
VIRTUAL
TITLE
MENU
SKIP PLAY
RESUME STOP
DISPLAY REV
CLEAR
See page 79 for information about how to make this setting using the DVD player's GUI.
To turn Dolby Virtual on and off
1
While the DVD is playing, press VIRTUAL.
• Each press of VIRTUAL toggles Dolby
Virtual on and off.
• Dolby Virtual cannot be used with a video CD or audio CD.
• Dolby Virtual is disabled during playback of a DVD recorded with DTS audio,
linear PCM audio and Audio MPEG Version 2.0.
• The QSound
76
GB
Dolby Surround
(Pro Logic)
Yes
VIEW VIDEO
MODE ADJUST
DIGITAL DIGITAL
GAMMA S.PICTURE
VIRTUAL
ENTER
RETURN
SKIP
STILL/PAUSE
FWD SLOW
REPEAT
PROGRAM
MEMORY DIRECT
mark used by Dolby Virtual is a trademark of QSound Labs, Inc.
Linear PCM Audio/
DTS Audio
No
VIRTUAL O N
MPEG Audio
Ver.2.0
No
GUI