Crankcase - Yamaha JT1 Series Service Manual

3-15 Crankcase
A. Separating
1) Remove the neutral stopper.
(21 mm)
2) Remove the shift drum stopper lever and
stopper spring.
(10
mm)
3)Remove the twelve pan head screws from the left
crankcase.
(EB Screw driver)
ENGINE• Crankcase
Fig. 3-15-1
Fig. 3-15-3
4) Install the crankcase separating tool on the right crankcase. Divide the crankcase while alternately tapping the
main axle and the crankcase with a soft-faced-hammer.
- 3 5 -