Video Setup Menu - Sony IPELA PCS-HG90 Operating Instructions Manual

AUX Local Monitor Out
Allows you to select whether to output the
audio which is input from the AUDIO IN
AUX 1 or the AUX 2 connectors from the
audio output of the communication terminal.
On: Outputs from the audio output.
Off: Does not output from the audio output.
REC OUT Mode
Monaural 2ch: Outputs audio from the
REC OUT (MIXED) R and L
connectors as two-channel monaural
sound.
Stereo: Outputs audio from the REC OUT
(MIXED) R and L connectors as stereo
left and right sounds.
Page 4/4
Audio Setup
Page: 4/4
Beep Sound
Sound Effect
Dial Tone
Ringer Tone
Beep Sound
Allows you to select whether the system
beeps each time you press a button on the
Remote Commander.
On: Enables beeping.
Off: Disables beeping.
Sound Effect
Allows you to select whether to output
sounds when the system starts, a video
communication starts or ends.
On: Outputs sounds.
Off: Does not output sounds.
Dial Tone
Allows you to select whether to output a
ring-back tone when you are dialing and
busy tone when the line is busy.
On: Outputs dial tones.
Off: Does not output dial tones.
Ringer Tone
Allows you to select whether to output a
ringer tone when you receive a call.
On: Outputs the ringer tone.
Off: Does not output the ringer tone.
2005.12.28 12:34
On
On
On
On
Save Cancel

Video Setup Menu

The following menus appear when you
select "Video" on the Setup menu. Select the
desired menu.
Video Setup
Video Input /Output
Video Format
Custom Input Label
Transmitting Image Quality
Other Settings
Video Input/Output
Video Setup
Link to Audio Input
VIDEO IN
S-VIDEO RGB YPbPr
SUB CAMERA
Audio Input Select
AUDIO IN
MIC EC-MIC(A7) A1/A3
Link to Audio Input
Allows you to switch the audio input in
conjunction with switching the video input
by linking each video input and a specific
audio input.
On: Links switching of the video input and
the audio input.
Off: Switches the video input and the audio
input separately.
Note
When "Link to Audio Input" is set to "On",
"Input Select" and "AUDIO IN" on page 1/2 of
Audio Setup menu cannot be selected.
VIDEO IN
Allows you to select video input.
HD-SDI 1: Selects the picture from the
camera connected to the VIDEO IN HD-
SDI 1 (MAIN CAMERA) connector.
HD-SDI 2: Selects the picture from the
camera connected to the VIDEO IN HD-
SDI 2 (SUB CAMERA) connector.
YP P : Selects the picture from external
b r
equipment connected to the VIDEO IN
YPbPr connector.
Registering Local Information
2005.12.28 12:34
Previous
2005.12.28 12:34
Off
HD-SDI HD-SDI
2 1
MAIN CAMERA
MIC
AUX1 AUX2 HD-SDI
Save Cancel
43