Tv Display Setting; Tv Type Setting - Sharp HT-CN400DVH Operation Manual

! TV display setting

Indicator
NORMAL/PS When playing a wide image (16:9) disc,
the left and right sides of the image are
cut (pan scan) to display a natural-look-
ing 4:3 size image.
A wide image disc without pan scan
is played back in 4:3 letterbox.
A 4:3 disc is played in 4:3.
NORMAL/LB When playing a wide image (16:9) disc,
black bands are inserted at the top and
bottom and you can enjoy full wide im-
ages (16:9) on a 4:3 size TV.
A 4:3 disc is played in 4:3.
WIDE A wide image (16:9) is displayed when
playing a wide image (16:9) disc.
" When playing a 4:3 image disc, the image size depends on the
setting of the connected TV.
" If you play back a wide image (16:9) disc with this unit connected
to a 4:3 TV, the vertically shrunk image is displayed.
Note:
When playing the disc with a fixed video format, it will not change even if the TV
screen size is changed.

! TV type setting

Setting
MULTI
NTSC
PAL
! Video output setting
1
2
S-VIDEO
SCART
Indicator Setting
Select this mode for the multi-system TV.
Select this mode for the NTSC TV.
Select this mode for the PAL TV.
Select "GENERAL SETUP" on the setup menu
screen (see steps 1 - 3 on page 17).
After selecting "VIDEO OUTPUT" in step 4 on
page 17, select "S-VIDEO" or "SCART" and
press the ENTER button.
Indicator Setting
Sending video signals from an S-VIDEO OUTPUT socket.
Sending video signals from a SCART OUTPUT socket.
03/7/2 HTCN400_500DVH_E.fm
HT-CN400DVH
HT-CN500DVH
ENGLISH
SETUP MENU -- MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
-- GENERAL PAGE --
TV DISPLAY
TV TYPE
S-VIDEO
VIDEO OUTPUT
OSD LANG SCART
SCR SAVER
MAIN PAGE
E-20
92LCN400E0270
D
F
S
V
I
N
P
E