Connecting To Computer - Sharp LC-20VM2 Operation Manual

Connecting to computer

This LCD AV monitor can be used as the monitor of personal computer.
This unit can be used with the following type of computer and display mode.
Computer
IBM PC(DOS/V, PC/V, PC/AT)
and compatible computers
AUDIO
INPUT
RGB
INPUT
(VGA60Hz)
To RGB
input terminal
Note
No RGB connection cable or PC audio cable is included. Use commercially available cables.
Align the pins of this unit and those of the RGB connection cable used to connect the computer and
insert, then securely fasten with the screws located at both ends.
Display mode
(Horizontal dots Vertical lines)
640 480
To AUDIO
input terminal
(commercially available)
(commercially available)
Handling of the RGB Connection Cable
Horizontal scanning frequency
Vertical frequency
31.4688 kHz
59.9405 Hz
Push off the hole cover for PC
connection when the back cover is set.
Hole cover
To AUDIO
output terminal
To RGB
output terminal
Clock frequency Note
25.175 MHz VGA
17
US