Adjusting The Preset Settings - Sharp LC-20VM2 Operation Manual

Adjusting the PRESET settings

The preset items can be set by the user.
ON/OFF
MUTE
MENU
AV INPUT
SELECT
VOL
–
SELECT
Selected item Factory setting
BRIGHTNESS [BRIGHT] Maximum brightness
UPSIDE [NORMAL] Normal vertical
RIGHT/LEFT [NORMAL] Normal horizontal
AV2 IN/OUT [IN] AV input 2 in input mode
AV1 LINE [NORMAL] The audio signals
entering from the AUDIO L
and R terminals are output
from the left and right
speakers respectively.
SCREEN MODE [MODE 1] MODE 1 is a simple
Note
• The Menu screen and the screen selected on the Menu screen remains on the display for 30 seconds. If no
button is pressed during the 30 seconds, the display returns to the initial screen.
• The signal input from the S-VIDEO input terminal is not output from the AV OUT terminal for monitoring.
5
After changing PRESET items, press MENU to exit from the Menu screen and return to the initial
screen.
1
Press MENU to display the Menu
screen.
2
Press SELECT to move the cursor
to PRESET.
VOL
3
+
Press VOL (+)/(–) to display the
PRESET screen.
4
Check the factory setting of each item on the PRESET screen.
The user can change the settings by using SELECT and VOL (+)/
(–) buttons.
[NORMAL] Brightness 60%
[DARK] Brightness 20%
[DOWN] Inverted image
image orientation
[MIRROR] Mirror image
image orientation
[OUT] AV input 2 changes to AV output mode
[MONO] Only the audio signals entering from the AUDIO L terminal are output
[MODE 2] MODE 2 is a calculated scan conversion mode and is suited for
scan conversion
mode and is suited
for still pictures.
Setting change
Suitable for viewing in well-lit areas. Saves
energy.
Sufficiently bright when viewing in dim areas.
To display images upside down for
special uses.
To display mirror images for
special uses.
AV input 1 is output from AV output 2 terminals to allow recording.
* Setting change possible only for AV INPUT 2
from the left and right speakers.
normal pictures.
* The scan conversion modes work in PAL and SECAM.
Adjustment
MENU
PICTURE
SOUND
PRESET
MENU
PICTURE
SOUND
PRESET
PRESET
BRIGHTNESS [BRIGHT]
UPSIDE [NORMAL]
RIGHT/LEFT [NORMAL]
AV2 IN/OUT [IN
AV1 LINE [NORMAL]
SCREEN MODE [MODE 1]
SELECT:
•
( )
ENTER : • EXIT: MENU
ABC
C B A
Video/audio signals entering
15
]
US