Part Names Of Main Unit; Upper Control Panel; Listening With Headphones - Sharp LC 20SH3U Operation Manual

Part Names of Main Unit

Controls

Upper control panel

VOL (Volume)
(–)/(+)
CH (Channel)
( )/( )
Speaker
A
• INPUT, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
Headphones
MENU POWER
INPUT

Listening with Headphones

Table stand
Easel type
The angle of the LCD TV set has to be kept at 12° .
Caution:
• Be careful not to hurt your fingers with the stand.
• Do not pick up the LCD TV set by its stand.
• Securely unfold the easel type table stand until you
hear a clicking sound.
Only use the easel type table stand after first unfolding
until a clicking sound is heard to ensure that it is stable.
SLEEP TIMER indicator
The SLEEP TIMER indicator lights up red when the
SLEEP TIMER is set to "ON".
Remote sensor
POWER indicator
The POWER indicator lights up green when the power is on,
and red when in the standby mode (the indicator will not light up
when the main power is off).
Plug the headphone mini-plug into the headphone jack located on
the side of the LCD TV set.
Adjust the sound volume using VOL (+)/(–) on the remote control.
On-screen display
VOLUME
20
NOTE
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone
mini-plug is connected into the headphone jack.
• Do not set the volume at a high level. Hearing experts advise against
extended listening at high volume levels.
Easel type table stand