Basic Operation; Turning On And Off The Main Power; Switching The Input Modes - Sharp LC 20SH3U Operation Manual

Basic Operation

Turning On and Off the Main Power

POWER indicator
● Press POWER. The POWER indicator instantly changes
from red to green and the LCD TV set is turned on.
On-screen display
S T E R E O
S A P
M O N O M O N O
A
• The On-screen display disappears after a few seconds.
● To turn off the main power, press POWER again.
Standby
To turn off the LCD TV set
Press POWER. The POWER indicator will turn red.
To turn the LCD TV set back on
Press POWER again. The POWER indicator will turn green.
POWER
2
1 1 : 5 3 A M

Switching the Input Modes

(INPUT1/INPUT2/TV)
1
Turn on the power of the connected video equipment.
2
Press INPUT ( )/(
source. The screen changes in order of INPUT1,
INPUT2 and TV mode each time INPUT is pressed.
INPUT1 (COMPONENT) mode
INPUT2 mode
TV mode
A
• INPUT1 :
Used for video equipment connected to the COMPONENT input
terminals.
• INPUT2 :
Used for video equipment connected to the INPUT2 terminal.
The S-video input terminal is additionally provided for the
INPUT2. If both the S-video terminal and normal video
terminals are connected with cables, the S-video input
terminal takes priority.
) to select the applicable input
I N P U T 1
4 8 0 P
I N P U T 2
2